This beautiful contemporary entry door
is called
The Sea Cliffs Entrance Door
It is faced on both sides with Old Growth Redwood
It is all bookmatched and vertical grain
It is All made of salvaged and eco-friendly materials
It has a vertical stainless steel accent detail on both sides.
The groove is 3 inches wide and inset about 1/8th of an inch
We installed an 18" stainless steel D-handle pull
This version is 36" x 80" x 1-3/4"


Here is the exterior view of the Sea Cliffs Entry

Here is the interior view of the Sea Cliffs Entry

Click on Any Image to Enlarge
103.jpg

104.jpg

105.jpg

I call this Redwood, "Cloud Redwood"


106.jpg

106a.jpg

106b.jpg

This wonderful pull from KnobDeco has no visible means of attachment ........ and I won't tell!

Click to see a larger view of the exterior view


107.jpg

108.jpg

109.jpg

The stainless steel accent is 3 inches wide

The deadbolt is Not the final deadbolt to be used


110.jpg

110a.jpg

111.jpg
The top and bottem a slightley recessed to allow for a drip edge and weather stripping in the jamb

They are using a stainless steel roller catch to keep the door closed


112.jpg

NOTE: This deadbolt is not included, but
only used for the benefit of the photos.

This door requires 5 ball bearing hinges
It weighs slightly over 150 lbs ...... solid!

Click to see a larger view of the interior view



Below is the provenance of the making of this beautiful door

201.jpg

202.jpg

203.jpg
Here is the design sketch by Ron Press of
Rosenthal-Thorton Construction

Here is a scanned view of the Old-Growth Redwood that is seen on both sides of the door. There are over 40 growth rings per inch
....... that is amazing


204.jpg

205.jpg

206.jpg
Each face is completely bookmatched from the same timber from the same tree

Click on Any Image to Enlarge

207.jpg

208.jpg

209.jpg

What's he doing ?


210.jpg

211.jpg

212.jpg

signed with pride

Here I am making a sample of the 3 inch groove for the stainless steel.


213.jpg

214.jpg

215.jpg

The stainless steel "wraps" both ends and is screwed to the top and bottom with stainless steel screws

The stainless strips are adhered and clamped for 3 says


216.jpg

217.jpg

218.jpg
Here I'm testing the adhesive that I settled on to adhere the stainless to the door

some "other" simple tricks !


219.jpg

220.jpg

221.jpg

Here are the beautiful stainless steel pulls that were supplied by wonderful folks at KnobDeco online

Yup! ....... it's fall


Click on Any Image to Enlarge

222.jpg

223.jpg

224.jpg

Here it receives its' first of 4 coats of varnish-oil


225.jpg

226.jpg

227.jpg

The door will be pre-hung on Mahogany jambs
with a Redwood facia to match the door

The door will be prehung and provided with weather stripping


228.jpg

229.jpg


RETURN TO WORK IN PROGRESS


RETURN TO DOOR GALLERY